wiki:access/osdata_on_nci

Overseas model data on raijin

Overseas model data in the Bureau's rtdb is now routinely extracted and sent to raijin:/g/data/rr4/opendap


UKGC

1. global2_180x360 (1 deg)

stream = ukgc
expver = 1

PARAM LEVEL STEP
T/U/V/GH 1000/950/925/850/700/500/300/200 0/6/12/18/24/30/36/42/48/60/72
RH 1000/950/925/850/700/500
W 925/850/700/500/300
T/U/V/MSL/TP/CP sfc

W = vertical velocity
TP = total precip
CP = convective precip

2. m_glbl_145x289 (1.25 deg)

stream = ukgc
expver = 125
levtype = pl/sfc/trpp_lvl/max_wind_lvl

PARAM LEVEL STEP
T/U/V 850/700/600/500/400/300/250/200/150/100 36
600 6/12/18/24/30/36
GH 850/700/600/500/400/300/250/200/150/100 6/12/18/24/30/36
RH 850/700/600/500 36
T trpp_lvl 6/12/18/24/30/36
GH trpp_lvl/max_wind_lvl 36
U/V max_wind_lvl 6/12/18/24/30/36


3. m_glbl_73x145 (2.5 deg)

stream = ukgc
expver = 25

PARAM LEVEL STEP
T 30 0/24/48
50 0
150/100 0/24/48/96/120
850/700/500/400/300/250/200 0/6/12/18/24/30/36/42/48/60/72/96/120
1000 0/24/48/72/96/120
sfc 0/6/12/18/24/48
U/V 30 0/24/48
50 0
150/100 0/12/24/48/96/120
850/700/500/400/300/250/200 0/6/12/18/24/30/36/42/48/60/72/96/120
1000 0/12/24/48/72/96/120
sfc 0/6/12/18/24/30/36/42/48/60/72/96/120
GH 30 0/24/48
50 0
850/700/400/300/200/150/100 0/24/48
1000/500/250 0/6/12/18/24/30/36/42/48/60/72/96/120
RH 1000/950/850/700/500 0/6/12/18/24/30/36/42/48/60/72/96/120
wnd_wav_ht 204.140 sfc 0/24/48/72/96/120
wnd_wav_per 236.140
wnd_wav_dir 235.140
swl_ht 237.140
swl_per 239.140
swl_dir 238.140
sig_wav_ht 229.140
T trpp_lvl 0/24/48
pres trpp_lvl/max_wind_lvl
U/V max_wind_lvl

excluded (non-global paid data)
m_ar_162x108


ECSP (no longer available on raijin)

m_glbl_73x145

stream = ecmwf
expver = 25

PARAM LEVEL STEP
T 850 0/to/168/by/24
U/V 850/700/500/200
GH 700/500
RH 850/700
MSL sfc


excluded (non-global)
m_ar_61x120
australia_121x101
aus_521x841
aus_261x421


USAVM

glob_361x720 (0.5 deg)

stream = usavm
expver = 1
levtype = pl/sfc/ht_sfc/trpp_lvl/max_wind_lvl/sgma_lvl/sgma_lay
atms_lay treated as sfc

PARAM LEVEL STEP
T 1000/975/950/925/900/850/800/750/700/650/600/550/500/450/400/350/300/250/200/150/100/70/50/30/20/10 0/TO/192/BY/3
sgma_lvl 0.995
sfc/trpp_lvl/max_wind_lvl
ht_sfc 2/80/100
U/V same as T but without sfc
pres sfc/msl/max_wind_lvl
ht_sfc 80
prcp sfc 192
abs_vort PL
GH PL
sfc/trpp_lvl/max_wind_lvl
conv_prcp sfc 192
ttl_cld atms_lay
hi_cld/mid_cld/low_cld sfc
omega PL up to 100
sgma_lvl 0.995
prec_wtr atms_lay
rel_hum PL
atms_lay
sgma_lvl 0.995
ht_sfc 2
sgma_lay 0.33-1/0.44-0.72/0.44-1/0.72-0.94
lift sfc
max_air_temp ht_sfc 2
cape sfc
spc_hum ht_sfc 2/80
prcp_3h/prcp_6h sfc
conv_prcp_3h/conv_prcp_6h
best_lift
ozone_ttl atms_lay

excluded
global_157x288 (1.15x1.25 deg) wave model data
m_glbl_145x289 (1.25x1.25 deg) waf (very broken, ie. causes neons2g to break)
m_glbl_73x73 (2.5x5 deg) quad (sfc winds)


JMAGSM

1. hi-res (PL 720x361, SFC 1440x721)

stream = jmagsm
expver = 1

PARAM LEVEL STEP
GH/U/V/T/RH/W 1000/975/950/925/900/850/800/700/600/500/400/300/250/200/150/100/70/50/30/20/10 0/to/90/by/3, 96/to/234/by/6
VO 500
10U/10V/2T/RH/SP/MSL/TP/TCC/HCC/MCC/LCC sfc


00Z: forecasts to 3.5 days only

VO = relative vorticity
SP = surface pressure
HCC = high cloud cover
MCC = middle cloud cover
LCC = low cloud cover

Note: data is in grib2 downloaded directly from GTS; mars-interface is not yet working

2. m_gl2_73x144 (2.5 deg)

stream = jmagsm
expver = 25

PARAM LEVEL STEP
U/V 850/500/200 0/24/48/72
GH 500
MSL sfc
TP sfc 24/48/72



CMCGEM

global_301x601

stream = cmcgem
expver = 1

PARAM LEVEL STEP
2T/U10/V10/MSL/TCC/2D sfc 0/TO/144/BY/3
TP sfc 3/TO/144/BY/3

TCC = total cloud cover
2T = 2m T
2D = 2m dewpt


Notes on mars retrieval of fields on ht_sfc/trpp_lvl/max_wind_lvl/sgma_lvl/sgma_lay

levtype = ht_sfc

levelist = 80/100

for fields on 2m or winds on 10m, use levtype = sfc

These fields are saved as pa???.grb

levtype = trpp_lvl/max_wind_lvl

use table = 136/137, eg. T at troppopause level,

param = 130.136

These fields are saved as pt???.grb and pw???.grb

levtype = sgma_lvl

use levelist = sigma level * 10000, eg.

levelist = 9950

These fields are saved as ps???.grb

levtype = sgma_lay

use levelist = first sigma layer * 10000, eg.

levelist = 3300 # to be worked on

These fields are saved as px???.grb

Last modified 6 years ago Last modified on Mar 12, 2015 11:58:50 AM