wiki:access/diff_baajb_xbjin



UMUI difference between job baajb and baapq (identical to xbjin)

-------------------------------------------------------------------------------------------------------
Job 1: Ngamai-baaj.b	"Reconfig & Run on Raijin - NWP settings (fm xbcnp -baajz)"
Job 2: Ngamai-baap.q	"N512 Um8.2 Fc NCI with Gen2 correction (FM xbjin)"
Date: 20140904				LONG COMPARISON
-------------------------------------------------------------------------------------------------------


1. snip: -not significant-

2. snip: -not significant-

3. snip: -not significant-

4. snip: -not significant-

5. snip: -not significant-

6. snip: -not significant-

7. snip: -not significant-

8. snip: -not significant-


9. 	In window <subindep_HandEdit>:
      -> Model Selection
         -> Input/Output Control and Resources
            -> User hand edit files
    
	Variable: <HEDFILE>
	Differences in Table Hand edits
 	1,6c1,6
	<  ~access/da/nwp_input/um/UMUI_IN/GL_HANDEDITS_8.2_stashc_DUSTPS32 Y
	<  ~access/da/nwp_input/um/UMUI_IN/GL_HANDEDITS_8.2_foamblk_tstar N
	<  ~access/da/nwp_input/um/UMUI_IN/GL_HANDEDITS_8.2_foamout N
	<  ~access/da/nwp_input/um/UMUI_IN/GL_HANDEDITS_8.2_pwr7_env_vars N
	<  ~access/da/nwp_input/um/UMUI_IN/GL_HANDEDITS_8.2_IOSRV_QG Y
	<  ~access/da/nwp_input/um/UMUI_IN/GL_HANDEDITS_8.2_SMNSout_10minTS Y
	---
	>  ~yix/keep/um/um8.2/GL_HANDEDITS_8.2_stashc Y
	>  ~yix/keep/um/um8.2GL_HANDEDITS_8.2_foamblk N
	>  ~yix/keep/um/um8.2/GL_HANDEDITS_8.2_foamout N
	>  ~yix/keep/um/um8.2/GL_HANDEDITS_8.2_noTevlim N
	>  ~yix/keep/um/um8.2/GL_HANDEDITS_8.2_pwr7_env_vars Y
	>  ~yix/keep/um/um8.2/GL_HANDEDITS_8.2_IOSRV_QG Y
	

10. 	In window <subindep_Compile>:
      -> Model Selection
         -> Compilation and Run Options
            -> Compile and run options for Atmosphere and Reconfiguration
    
	Variable: <ARECON>
	Check box: Run the reconfiguration
	   Job baaj.b: Entry is set to 'ON'
	   Job baap.q: Entry is set to 'OFF'

	Variable: <FILEEXEC>
	Entry box: Filename for the Model executable
	   Job baaj.b: Entry is set to 'xbncc.exe'
	   Job baap.q: Entry is set to 'umefa.exe'

	Variable: <FILEREC>
	Entry box: Filename for the Reconfiguration executable
	   Job baaj.b: Entry is set to 'xbncc_qxreconf'
	   Job baap.q: Entry is set to 'umefa_qxreconf'

	Variable: <PATHEXEC>
	Entry box: Directory for the Model executable
	   Job baaj.b: Entry is set to '/short/dp9/jtl548/82/ROUTDIR/jtl548/xbncc/umatmos/bin'
	   Job baap.q: Entry is set to '/short/dp9/ycx548/data/um/bin/n512'

	Variable: <PATHREC>
	Entry box: Directory for the Reconfiguration executable
	   Job baaj.b: Entry is set to '/short/dp9/jtl548/82/ROUTDIR/jtl548/xbncc/umrecon/bin'
	   Job baap.q: Entry is set to '/short/dp9/ycx548/data/um/bin/n512'

11. snip: -not significant-

12. 	In window <atmos_Science_Physics>:
      -> Model Selection
         -> Atmosphere
            -> Scientific Parameters and Sections
               -> General Physics Constants
    
	Variable: <CO2START>
	Entry box: CO2 Mass Mixing Ratio for whole run (kg/kg)
	   Job baaj.b: Entry is set to '6.00200e-04'
	   Job baap.q: Entry is set to '5.94100e-04'

13. 	In window <atmos_Science_Section_Cloud>:
      -> Model Selection
         -> Atmosphere
            -> Scientific Parameters and Sections
               -> Section by section choices
                  -> Section 9: Large Scale Cloud
    
	Variable: <CLDAREAPRM>
	Hidden variable: Method of cloud area parametrization
	   Job baaj.b: Variable is set to '1'
	   Job baap.q: Entry is inactive

	Variable: <CLD_AREA>
	Check box: Including cloud area parametrization (Gen2 Rad only)
	   Job baaj.b: Entry is set to 'ON'
	   Job baap.q: Entry is set to 'OFF'

14. 	In window <atmos_Science_Section_Aero_Dust>:
      -> Model Selection
         -> Atmosphere
            -> Scientific Parameters and Sections
               -> Section by section choices
                  -> Section 17: Aerosols
                     -> Mineral Dust
    
	Variable: <ACON(112)>
	Radio button: Ancillary file to be
	   Job baaj.b: Entry is set to 'Configured'
	   Job baap.q: Entry is set to 'Not Used'

	Variable: <AFILE(27)>
	Entry box: and file name
	   Job baaj.b: Entry is set to '{$UM_ANCIL_SOILDUST_FILE}'
	   Job baap.q: Entry is inactive
UMUI 
	Variable: <APATH(27)>
	Entry box: Enter directory or Environment Variable
	   Job baaj.b: Entry is set to '{$UM_ANCIL_SOILDUST_DIR}'
	   Job baap.q: Entry is inactive

	Variable: <DUSTVEG>
	Radio button: Emit dust from bare soil components of vegetated gridboxes:
	   Job baaj.b: Entry is set to 'Emit dust from seasonally bare soil, using LAI'
	   Job baap.q: Entry is set to 'Emit dust only from the bare soil tile'

15. 	In window <atmos_Science_Section_Dassim>:
      -> Model Selection
         -> Atmosphere
            -> Scientific Parameters and Sections
               -> Section by section choices
                  -> Section 18: Data assimilation and temporal filtering
    
	Variable: <ATMOS_SR(18)>
	Radio button: Choose the relevant section release
	   Job baaj.b: Entry is set to 'No data assimilation or temporal filtering'
	   Job baap.q: Entry is set to '<2A> Data assimilation or temporal filtering included'

16. 	In window <atmos_Science_Section_LW_Meth>:
      -> Model SelectionUMUI 
         -> Atmosphere
            -> Scientific Parameters and Sections
               -> Spec of trace gases
                  -> Gen 2-stream LW rad absorption by CH4 (Methane)
    
	Variable: <LW2METHMIX>
	Entry box: Specify mass mixing ratio of Methane
	   Job baaj.b: Entry is set to '1.006e-06'
	   Job baap.q: Entry is set to '9.994e-07'

17. 	In window <atmos_Science_Section_LW_N2O>:
      -> Model Selection
         -> Atmosphere
            -> Scientific Parameters and Sections
               -> Spec of trace gases
                  -> Gen 2-stream LW rad absorption by N2O
    
	Variable: <LW2NOXMIX>
	Entry box: Specify mass mixing ratio of  Nitrous Oxide
	   Job baaj.b: Entry is set to '4.945e-07'
	   Job baap.q: Entry is set to '4.925e-07'

18. 	In window <atmos_Science_Section_LW_CFC11>:
      -> Model Selection
         -> Atmosphere
            -> Scientific Parameters and Sections
               -> Spec of trace gases
                  -> Gen 2-stream LW rad absorption by CFC11
    
	Variable: <LW2CFC11MIX>
	Entry box: Specify mass mixing ratio of CFC11
	   Job baaj.b: Entry is set to '1.110e-09'
	   Job baap.q: Entry is set to '1.129e-09'

19. 	In window <atmos_Science_Section_LW_CFC12>:
      -> Model Selection
         -> Atmosphere
            -> Scientific Parameters and Sections
               -> Spec of trace gases
                  -> Gen 2-stream LW rad absorption by  CFC12
    
	Variable: <LW2CFC12MIX>
	Entry box: Specify mass mixing ratio of CFC12
	   Job baaj.b: Entry is set to '2.187e-09'
	   Job baap.q: Entry is set to '2.225e-09'

20. 	In window <atmos_InFiles_Start>:
      -> Model Selection
         -> Atmosphere
            -> Ancillary and input data files
               -> Start dump
    
     snip: -- start dump specification --

21. 	In window <atmos_InFiles_Versions>:
      -> Model Selection
         -> Atmosphere
            -> Ancillary and input data files
               -> In file related options
                  -> Ancillary version files
    
	Variable: <LUSRANCVN>
	Check box: User to specify ancillary version files
	   Job baaj.b: Entry is set to 'ON'
	   Job baap.q: Entry is set to 'OFF'

	Variable: <USRANC_FLNM>
	Entry box: Specify the Ancil versions file
	   Job baaj.b: Entry is set to '/projects/access/umdir/ancil/n512/ancil_versions/ancil_versions_n512_ps30_01.txt_000'
	   Job baap.q: Entry is inactive

	Variable: <USRANC_VN>
	Entry box: Specify the Ancil filenames version
	   Job baaj.b: Entry is set to '/projects/access/umdir/ancil/n512/ancil_versions/ancil_fnames_n512_v2.txt_001'
	   Job baap.q: Entry is inactive

22. 	In window <atmos_InFiles_PAncil_Soilm>:
      -> Model Selection
         -> Atmosphere
            -> Ancillary and input data files
               -> Climatologies & potential climatologies
                  -> Soil moisture and snow depth
    
	Variable: <ACON(36)>
	Radio button: Ancillary field to be:
	   Job baaj.b: Entry is set to 'Not used'
	   Job baap.q: Entry is set to 'Updated'

	Variable: <AFILE(2)>
	Entry box: and file name
	   Job baaj.b: Entry is inactive
	   Job baap.q: Entry is set to 'an_smc'

	Variable: <APATH(2)>
	Entry box: Directory name or Environment Variable
	   Job baaj.b: Entry is inactive
	   Job baap.q: Entry is set to '{$STAGING_DIR}'

23.   snip: -- ANCIL DIFF (xbjin do not run reconfig, so do not use ancils --

24. 	In window <atmos_InFiles_PAncil_AeroClim>:
      -> Model Selection
         -> Atmosphere
            -> Ancillary and input data files
               -> Climatologies & potential climatologies
                  -> Aerosol Clim Ancils
    
	snip: -- ANCIL DIFF (xbjin do not run reconfig, so do not use ancils --


25.  snip: -- ANCIL DIFF (xbjin do not run reconfig, so do not use ancils --


26.  snip: -STASH DIFF-


27. 	In window <atmos_STASH_UserDiags>:
      -> Model Selection
         -> Atmosphere
            -> STASH
               -> User-STASHmaster files. Diags, Progs & Ancills.
    
	Variable: <USERLST_A>
	Differences in Table Specify the STASHmaster files
 	1c1,2
	<  ~access/da/nwp_input/um/UMUI_IN/GL_USTASH_8.2_UVFLUX_4581
	---
	>  /g/sc/ophome/ashare/APS1/g/um/vn7.5/ctldata/ext/GL_USTASH_7.5_obukhov
	>  /g/sc/ophome/ashare/APS1/g/um/vn7.5/ctldata/ext/GL_USTASH_7.5_density
	

28. snip: -STASH DIFF-

------------------------------------------------------------------------------------------
A total of  28 window-entries differences reported
------------------------------------------------------------------------------------------

Last modified 6 years ago Last modified on Oct 10, 2014 2:29:20 PM